Skip to main content

How to block incoming calls on your virtual number

Set up a simple call flow that hangs up every incoming call automatically, or sends it straight to voicemail.

Before you start: you'll need a virtual number. If you don't have one yet, here's how to get one.

If you only use your number for messages, or simply don't want to take calls on it, you can block incoming calls with a call flow that has a single step. You can either hang up every call automatically, or send every call straight to voicemail so callers can still leave you a message. Either way, nobody on your team gets a ring.

1. Open your number's call settings

Go to your virtual number's configuration page and click Inbound Call Handling.

2. Create a new call flow

Click Create new call flow. The call flow builder opens with the Call arrived at step, which represents every incoming call to your number.

3. Choose what happens to the call

Click the + button. In the General tab, pick one of these components:

  • End call: every incoming call is hung up automatically.

  • Send to voicemail: every incoming call goes straight to voicemail, so the caller can leave a message.

Connect the component directly to the Call arrived at step, with nothing in between. For example, with End call your flow looks like this:

4. Save

Click Save. From now on, every incoming call to that number ends automatically or goes to voicemail, depending on what you chose.

💡 Want to take calls again? Go back to Inbound Call Handling and change or remove the call flow. For other setups, see How to automatically answer and route your incoming calls.

Did this answer your question?